*?????????????????????????????????????????????????????????????????????
*?????????????????????????????????????????????????????????????????????
vedio.23,无法识别网卡,找不到资料,以后再看
**============================================================================================
ftp ftp ftp ftp ftp ftp ftp ftp ftp ftp ftp ftp
**============================================================================================
ftp ftp ftp ftp ftp ftp ftp ftp ftp ftp ftp ftp
**============================================================================================
*登录,退出
** ftp 192.168.0.1
** bye
*下载
** get xxxx.zip
rpm –import http://download.openvz.org/RPM-GPG-Key-OpenVZ
**============================================================================================
putty putty putty putty putty putty putty putty putty putty
**============================================================================================
putty putty putty putty putty putty putty putty putty putty
**============================================================================================
绿色:可执行文件
蓝色:目录
红色:tar包 压缩文件
黄色:设备文件
浅兰色:链接文件
**======================
虚拟机设置 net和主机公用一个ip
**======================
* command
& descirbe
*内核
*命令
**ifconfig 查看IP地址
**clear 清屏
**ls -l /home --show a dir content 根目录下的
ls /dev|more --管道分页
**useradd jack 创建用户
passwd jack 激活用户,去创建密码
**帮助
**ls --help
** man ls ---q退出 --default is man1
ls /usr/share/man --man的配置
man1 --user command
man5 --file
**info ls
**ls -l -长模式
**ls -a 隐藏文件
**cp
cp ./b.c ./yang ---'./' is current directory,'./..'is parent directory
"." and ".." all are hard links
cp -r /etc/sound /root ---copy directory
cp -r /root/yang . --copy to the current directory
**mv --move or rename
mv index.html yang
mv yan.c guo ----if the name is unsame,'mv' can rename
**rm
rm yang/qqq.c --remove the file and reply 'yes'
rm -f yang/b.c ---femove the file forced
**touch create a empty file or update the time of file
** cd ~ --go to the home dir of current user
**pwd --see the real complete path
**mkdir
**rmdir -- remove a empty dir
rm -fr yang --remove a dir forced anyway
**cat ---see the content of file
**more --see the file per a screen ,only can go down
**less ---it just like 'more' but can go up
**date
**cal
**df --the the capacity of disl
df -h ----see the size with the unit of G
**du --see the size of file
du -h sound ----see the size with the unit of k
**head --see the front lines (default is 10 lines)
head 30 install.log ---see the front 30 lines
**tail
tail -f messages ---see the content with date
**控制台
**alt+f7 --change the current console
**env --see the environment variable
**su jack --change the current user,but don't change the environment variable
**su - root --change the current user,and change the environment variable
有高级用户向低级用户切换时候,不用输入密码
**重启
**reboot
**shutdown -r now
**inti6
**关机
**halt
**shutdown -h now
**poweroff
**init0
**file
file b.c ---see the informatio of file
**chmod --change the right of file
chmod u+x install.log --grant right of x on install.log to u
chmod u-x install.log
chmod u=rwx b.c --grant authority no matter whether u has those right
chmod 777 xiao.txt --change the authority by integer :r-4,w-2,x-1
chmod -R 777 guo --change the authority about all the file recurrence
**chown --used by root to change the ownner of the file
chown jack hello.c
**chgrp --used by root to change the groupe of the file
chown root[1]:root[2] hello.c --root[1] is ownner,root[2] is group
**echo
echo "nihao a "> b.c --write words to a file
**建立链接
**硬链接 --完全等同与源文件,不能为dir做链接
ln b.c bb.c
**软连接 --快捷方式
ln -s bb.c bs.c
**id root --see the infomation of the user
**umask 022 -change the umask value
//=====================================
*umask --决定用户的默认权限
**一般用户umask为002
系统用户umask为022
** umask ---ses the umask with integer
umask -S -- see the umask with letter
&&文件默认是rw-rw-rw,经过umask运算类得到相对应用户的权限
*[root@localhost root]#
**[用户名@主机名 当前目录]#
默认登录到home
# --supermanager
$ --common user
* dev --device file
**bxx-块设备, cxx-字符设备
*虚拟控制台 ,用户身份切换
**虚拟控制台12个,前六个本地登录
**vi /etc/inittab 修改控制台文件
# Run gettys in standard runlevels --means 6 consoles
1:2345:respawn:/sbin/mingetty tty1
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6
**alt+f7 --change the current console
*文件种类
- 一般文件
d:目录文件
b:块设备文件 ---硬盘,软盘,打印机
c:字符设备文件 --键盘,鼠标
l:链接文件 --快捷方式
软链接,硬链接
p:人工管道
*文件权限
**用户分类
**文件拥有者 u
**所属组的成员 g
**其他用户 o
**-rwx[1]r-x[2]r-x[3] 1[1] root[1] root[2] 11554[1] 12月 21 18:04[1] b[1]
rwx[1] --文件拥有者的权限
r-x[2] ---群组成员的权限
r-x[3] --其他用户的权限
1[1] --硬链接号
其中root[1]是拥有者,root[2]是群组
11554[1] --大小
12月 21 18:04[1] --修改时间
b[1] --文件名
**权限分类
**读 r
**写 w
**执行 x
**强制位 --ext2 ---表示以后再目录中无论谁创建文件,都是setuid等规定的组
**set uid --u --s--4 -如果没有,用大写表示,如果原先有,用小写表示
**set gid --g --s--2
**冒险位
**sticky --o --t--1
** chmod 4000 4000 ---更改权限
**ext2/3中文件的构成
**文件名最大为255字符,
*目录
*Linux中 的应用工具分类
&&交互工具
&&过滤器
&&编辑器
**输入输出 --对应文件存放在/dev/std*
--/dev/stderr /dev/stdin /dev/stdout
&&标准输入stdin(0)
&&标准输出stdin(1)
&&标准错误输入stdin(2)
*重定向
**'<'重定向输入源
** tr 'o-z' 'O-Z' < hello.c //--tr is modify the char
----make 'tr' execute with data of hello.c
----this command sentence is to upcase thel letter between 'o' and 'z'
&&标准输入重定向
**<< --save all letter from keyboard temperary then send them to shell only once
**cat > tt.c <<! ///--write to tt.c end by '!'
&&输出重定向
** ls > lsfile ---write the info which should be printed to lsfile
and override the old content of lsfile
** ls >> lsfile --append new content to old content of lsfile
&&错误输出重定向 2>
**ls-l 2> errfile --put the error message to errfile and override
**ls-l 2>> errfile --don't override
&&双重输入输出重定向
**ls-l 2> errfile 2>> errfile --redirect once
**ls-l &> allfile --put all infomation to a file once
ls-l > allfile 2>&1 --same as &> ,2> is error info,'1' is correct info
*管道
** ls -l /etc |more
ls -l /etc |more |grep sysconfig --use some pipe once
**cat < file1 > file2 ---cope the content of file1 to file2
**cat hello.b hello.c > all.c ----merge some file to a singal file
cat hello.* > all.c ---same to upper
*可执行文件搜索
**which --查找可执行文件的完整路径,查询顺序alias(别名) ->$Path
** which ls
**echo $PATH ---show the system path
**whereis --more detailed than which
*普通文件查找,
**slocate & locate --all same
&&/etc/updatedb.conf ---updatedb数据库的配置
**updatedb --update the database
**find ---不用数据库,因此比slocate慢
-user,-group,.nouser,.name.perm,size,type,nouser(don't have user),nogroup
**find /root/guo -user jack ---find file in folder guo ownned by jack
**find . -group jack ---find file in folder guo ownned by group jack
**find -name hello
**find -size +10 ---find file whose size larger than 10k
**find -perm 0644 ---find file by authority
find -perm -6000 --有'1'的位必须都有'1'
find -perm +6000 --有'1'的位只要有一位有'1'即可
**
**-exec 指令 {} \ ; --'{}'表示找到的文件,'\'表示禁止转义';'表示结束
*常用的文件操作指令
** wc --统计文件的行,词,字数
wc tt.c --- -l 行数,-w 词数,-c 字符数
**grep --显示文件匹配关键字的行
grep -n -v pri tt.c //-能显示行号,-v显示未选中行
**sort --排序,-k 根据那一栏排序,-t 根据什么分割烂,
sort -t: -k3 /etc/passwd ---以':'为分隔符,分割后的第三栏排序
**diff --查看文件的差异
diff hello.c hello.b
2c2 ---第2行
< int Main() --'<' 表示前面的文件
---
> int main() --'>' 表示后面的文件
**comp --show where are the differiences
**uniq ---show the content unique
**cut --show a special line
cut -f3 hello.c --only show a filed special
cut -c3-11 hello.c ---cut chars from No.3 to No.11
**paste ---将文本安列拼接
paste hello.c hello.b >> all.c --pastte the content of hello.* to all.c
cat hello.c hello.b > all2.c ---cat是竖直的merge,而paste是水平的
*压缩
**gzip,gunzip ---linux标准压缩工具,压缩文件
**gzip all2.c --压缩
**gzip -d all2.c.gz --解压
** zcat all.c.gz --查看压缩文件的内容
**compress,uncompress --旧的unix压缩工具
**bzip2,bunzip2 --更新的linux工具
** bzip2 all2.c --压缩
** bunzip2 all2.c.bz2 --解压
** bzip2 -d all2.c.bz2 --解压
**bzcat all2.c.bz2 --查看压缩的文件内容
*tar --打包,但不压缩
c 备份 ; v将过程输 出; x从文件中解出备份
f 打包后的文件名; t, list the contents of an archive(档案)
C,change to directory DIR
** tar cvf auth.tar auth --打包
**tar xf auth.tar --解包
**tar tf auth.tar --查看包中内容
**tar cvf my.tar hello.c -C /root --更改打包后的存放路径
**tar zcvf 2.tar.gz auth --打包并用gzip压缩,文件名无所谓
**tar zxvf 2.tar --解包并用gzip解压
** tar jcvf 3.tar.bz2 auth --打包并用bzip2压缩
**tar jxvf 3.tar.bz2 --解包并解压
*dump --备份ext2/3文件系统
**dump -0[1]u[1] -f[1] /../..[1] /../..[2]
--0[1],完全备份;u[1],备份操作记录在/etc/dumpdates中,
u[1]在备份子目录时候不能使用此参数,只有顶层目录才可以
f[1],指定备份路径,/../..[1],备份的路径
/../..[2],源路径
**dump -0 -f myback guo ---将过被分在myback文件中
dump -0u -f /dumproot /boot 备份顶层目录
**df --显示每个文件所在文件系统的信息
/etc/passwd ----存放用户信息
*restore --还原ext2/3文件系统
** t,列出备份文件内容;r,还原;f,指定文件
**restore -rf
restore -tf /dumproot
restore -rf
*shell /etc/shells--shell存放位置
*BUSH
**变量
**echo $a ---得到变量值
echo ${a}
**a=${a}123 --不能有空格
**unset a --删除a
**env --查看环境变量--- ,包括字符集
set --查看所有变量
环境变量大写,一般变量小写
**预定义环境变量 --
**cd $PATH --go to the home directory
**HOME --current user ' home directory
**PATH --the path to find executable file
**LANG --default language
**locale -a --查看locale信息
**PS1 --行提示符
\d,日期; \H主机名;\h,主机名称的第一个词
\t,时间(24,hh:MM:ss);\T,时间(12);\A(24)
\u,current user acount,\v,bash version;\w,complete work directory'
\W,current directory' basename' last name;\#,the number of command;
\$,the user' identity
$PS1==\u@\h \W]\$
**export a ---将一般变量改为环境变量
**history --show comands userd recently
history 10 --show the last 10 commands
echo $HISTSIZE --show the number of command system can remenber
**!
!! --重复执行上一条指令
!a --重复执行上一条以a为首的指令
!number --执行记录号码为number的指令
!-number --执行前第number条指令
!$ --get the last word of last command
[ctrl + r] ---seek one of command of history
**别名
**ll --like ls -l
**alias --show all the alias
**alias a="ls -l" --set a alias
** unalias a --remove a alias
**命令行输出
&& " .. " --如果有特殊符号,则转义
$ ,\,`,! --' " ' 无法禁用
&& ' .. ' --如果有特殊符号,不转义
**执行引用符
ls -l `pwd` ---先执行pwd,其结果作为参数由ls -l 来执行
**数学运算 ---$[]
echo $[1+4]
**逸托符 --- \,
--用于取消命令行中的特殊含义,转义
--表示一行未结束
** 命令行结束符; --
ls; pwd; ls -l --exectue many commands once
**子shell激活()
(HOME=/root) --这条命令在子shell中执行,不影响当前的shell
**逻辑运算符 &&,|| 如果符合条件,后面的命令就不执行
ls -l ccc ||mkdir ccc --如果 ls -l ccc不存在ccc,则创建ccc
ls goog.c && echo yang || echo guo --模拟'?:'运算符,都是顺序执行的,
**定制登录shell
&&全局设置文件
/etc/profile ----所编序号为登录时,文件加载顺序
/etc/bashrc ---后面的会将前面的覆盖
&&用户设置文件
~/.bash_profile
~/.bashrc
&&其他
~/.bash_logout
~/.bash_history
/etc/profile.d
**login as: root --初次登录
加载顺序:/etc/profile => ~/.bash_profile => ~/.bashrc => /etc/bashrc
**su jack ---开启非登录shell
加载顺序:~/.bashrc =>/etc/bashrc
su -jack ---开启登录shell
加载顺序:/etc/profile => ~/.bash_profile => ~/.bashrc => /etc/bashrc
*hot keys
**ctrl + d 输入结束
**ctrl + c 键盘输入中断
**ctrl + s & ctrl + q: 暂停/恢复屏幕输出
**ctrl + l : 清屏
**tab :补充命令和文件名
*系统监控
**uname --显示系统信息
uname -a --show all information 内核版本号
**hostname --显示 change 主机名
**last --最近的用户登录,从/var/log/wtmp中得到记录
**lastlog --列出每一个用户的最近登录
**free --内存使用状况
vmstat --same to upper
**top ---系统监视器
top -b -n 2 >cup.c --将top执行两次,并写入cpu.c
-b --批处理
-n 2 --执行几次
&& 排序
N,pid; M,内存; P,cpu; T,time
**ps ---显示进程
ps -A ---显示所有进程
ps -e --samp to upper
ps -a ---不列出与终端有关的进程
ps -u ---有效用户的进程
ps -x ---列出完整信息
ps -l ---以长模式显示信息
ps -f ---以完整模式显示信息
ps aux --一般不加'-'
ps -ef
**pstree --以树型结构表现父子关系
pstree -a ---以ascii链接
pstree -aup ---显示pid
** pgrep httpd --查看apache进程
/etc/rc.d/init.d/httpd down --对apache启动或是停止
pkill httpd --kill process by the name of service without pid
**gnome-system-monitor --在新建终端上面查看进程信息
*v [-singal ] PID
**top & --后台运行命令
**kill -l --查看kill所有可以传递的信号
1) SIGHUP --重新启动 2) SIGINT --ctrl+c中断 3) SIGQUIT 4) SIGILL
5) SIGTRAP 6) SIGABRT 7) SIGBUS 8) SIGFPE
9) SIGKILL --强制中断 10) SIGUSR1 11) SIGSEGV 12) SIGUSR2
13) SIGPIPE 14) SIGALRM 15) SIGTERM ---正常结束进程 17) SIGCHLD
** ps -ef|grep 'top' --通过管道grep来获得进程top的信息
** kill -9 8177 --kill process whose pid is 8177
**killall +进程名
**xkill 杀死某个应用
**进程优先级
&& -高 ;+低 ,只有root才能启动高优先级,(-20~19)
普通用户只能设低优先级(0-19)
**nice
nice -n -8 top & --change the priority of process
**renice -n pid --can change the priotity a running process
&&top 查看后,输入'r'会提示输入要renice的pid
**nohup command & --将进程送入后台,并且在console退出后,进程仍不挂断
**ctrl + z ---将前台程序暂停,并丢入后台
工作
**jobs
jobs -l --see all the jobs
**fg --将后台进程拉回前台
fg %1 --将作业号1的作业,放在前台
**bf ---激活后台暂 停的进程
*/proc虚拟目录,内核信息
** cat /proc/cpuinfo --查看cpu信息
** cat /proc/meminfo --查看内存信息
*系统日志
&& /var/log --日志文件目录
&&/var/log/dmesg --核心启动日志
&&/var/log/messages --系统报错日志
&&/var/log/maillog --邮件系统日志
&&/var/log/xferlog/ --ftp使用日志
&&/var/log/secure --安全信息
&&/var/log/wtmp --登录记录,二进制文件
*用户管理
**检查用户身份
**who --see the current users online
**groups --show the groups users belonged to
groups root --show the groups root belonged to
**id --show the id of user
**finger --show detail of users
** who am i --show the current user's detail infomation
whoami ----show the current user's simple infomation
w --show all the users' detail infomation online
**更改用户信息
**usermod
usermod -c "TomSa" tom --更改用户全名
usermod -d /home/tomm tom --change home directory,but don't create directory
usermod -e "012-02-26" tom --set the expire time of user's password
usermod -G root tom --add tom to group root
usermod -g 0 tom --change the gid of tom
usermod -a /bin/csh tom --change the default shell of tom
usermod -u 504 tom tom --change the uid of tom
usermod -p tomm tom --change the password of tom
usermod -L tom --lock tom's pwd
** cd ~tom --go to tom's home directory
** passwd -S tom --show the state of pwd
** userdel -r tomm --delete user with all tom's things
**cat /etc/passwd|wc --查看passwd的记录
**cat /etc/passwd|wc -l --查看passwd的记录数
&&uid 1~99为系统保留的默认找好
100~499为保留给服务使用
uid>555,一般用户
&& /etc/login.defs --show the info of login
CREATE_HOME yes --whether create home dir
&& /etc/skel/ --where does system copy file from to home when create a new user
&&/etc/shadow --where usres' password stored
&&shadow 默认权限400 ,passwd默认权限640
&&如果密码为!,表示密码已被锁定
**authconfig --config system with GUI
*组管理
&&/etc/group ---where the infomation of groups stored
/etc/gshadow -----where the password of groups stored
**groupadd
**groupdel
**groupmod
groupmod -n san zhang --change zhang's name to san
**gpasswd san --add password for a group
**gpasswd -a jack san --add user jack to group san
&&有效用户群组
**newgrp san --change the valid group to group san
**useradd -u 509 yan --指定新用户的uid,默认是已有的max(uid)+1
** useradd zhen -s /bin/csh --指定新用户的shell
**uaeradd -M xiao2 --不创建home dir
**useradd xiao3 -d /root/guo --change user's home dir
** ls -l /root/guo --创建系统账号
*设备文件 --文件存放在/dev
*设备文件分类
&块设备文件(b),缓冲区为512b-32kb大小
&字符设备文件(c),无缓冲去,一次1byte
*常用字符设备文件
**/dev/null --无限字符接收设备,接收后,直接丢弃
**/dev/zero --same to upper,无限零资源,------该设备无穷尽地提供0,可以使用任何你需要的数目——设备提供的要多的多。他可以用于向设备或文件写入字符串0。
**/dev/tty[0-31] --虚拟终端
**/dev/ttyS[0-9] --串口
**/dev/lp[0-3] --并口,(打印机)
**/dev/console --控制台
**/dev/fb[0-31] --显卡数据传输设备
*符号链接设备文件
*备份文件或分区
**dd if=/etc/passwd of=/root/passwd.backup --备份文件
dd </etc/passwd >/root/passwd.ba --samp to upper
**dd </root/passwd.ba > /etc/passwd --还原
**mknod --建立设备文件
**/usr/src/linux-2.4.20-8/Documentation/devices.txt --linux主号和从号的位置
**kudzu --red hat linux 硬件自检工具
**chkconfig kudzu off --关闭自动检测
**hwbrowser --图形界面下的硬件管理器
*硬盘
**硬盘分区工具
&&disk druid ---安装linux时候使用,图形界面
&&fdisk --广泛以用于字符界面下的各种os
** fdisk -l /dev/sda ---查看sda硬盘的分区信息
Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 208813+ 83 Linux
/dev/sda2 27 90 514080 82 Linux swap
&&Boot,系统启动加载分区
&&d,删除; p显示分区; w,保存退出; q,不保存退出; n,添加新分区
&&创建虚拟内存,则更改分区的id为82
** mkswap /dev/sda3 --创建新的swap分区后,要将其激活,即格式化
**swapon /dev/sd2 --将新建虚拟内存添加到虚拟内存上
**swapoff /dev/sd2 --将新建虚拟内存关掉,不在被加载
&&第二种方法
**dd </etc/passwd >/root/passwd.ba --先创建一个快
mkswap /dev/sda3 --创建新的swap分区后,要将其激活,即格式化
**partprobe ---让分区生效
*ssh
**rpm -qa |grep openssh --查看是否安装了ssh
**service sshd start --启动ssh
/etc/rc.d/init.d// start --启动ssh
*文件系统
&& ext2 ext3 文件系统
&&超级快,记录文件系统信息,经常会被备份
** dumpe2fs /dev/sda2|more --查看分区中的超级快信息,在Group 0:之前标注
**lsattr --查看文件属性
**chattr --改变文件属性 ,+,-
A, 文件被修改,更改时间不变; a,只能追加内容,不会覆盖,只有root才能设定
d,备份时候,不会被备份; i,永远不能改变和改变,只有root才能设定
j,将文件记录纸ext3中,添加日志; S,更改时候,写入文件系统中
** chattr +i guo.c
&& ReiserFS 文件系统,最大管理6TB
*创建文件系统
**mkfs -t
mkfs -t ext3 /dev/sda3 --在sda3上创建文件系统
**mke2fs
//=================================================================================================
CentOS Linux CentOS Linux CentOS Linux CentOS Linux CentOS Linux CentOS Linux CentOS Linux
//=================================================================================================
CentOS Linux CentOS Linux CentOS Linux CentOS Linux CentOS Linux CentOS Linux CentOS Linux
//=================================================================================================
*修改启动界面,只启动命令行界面
** vi /etc/inittab
更改id:5:initdefault --->id:3:initdefault
*启动window界面
** startx
*vi
*更改网卡ip
** ifconfig eth0 192.168.1.9 netmask 255.255.255.0 up -- use 'up' to work this command at once
**ifconfig eth0:0 192.168.1.4 netmask 255.255.255.0 up --generate a virtual ip
**cp /etc/sysconfig/network-scripts/ifcfg-eth0 /..../ifcfg-eth0:0 --将配置的虚拟ip保存为真正ip
vi ifcfg-eth0:0
--DEVICE=eth0:0
--IPADDR=192.168.1.4 --change those two places
**service network restart --restart a network card
**虚拟机下 Dertermining IP information for eth0....failed - no link present check cable
** 在 /etc/sysconfig/network-scripts/ifcfg-eth0 末尾添加
check_link_down() {
return 1;
}
** service network start 重启
** ifconfig eth0:1 down --down (close) a ip
**service network restart --restart a network card
*更改ip配置方式
** /etc/sysconfig/network-scripts/ifcfg-eth0
*
**wget http://www.baidu.com/.../zhang.txt --download a file from webservice
http://xinwen.xcu.edu.cn/uploadfile/tongzgg/UploadFiles_tzgg/201105/20110513104637910.doc
*网络诊断工具
**route see the ip route tablp
** traceroute baidu.com --查看访问baidu.com 经过的路径
** curl --head baidu.com --查看baidu使用什么服务器
** netstat -a -l --show all ports useed
** netstat -ant
*进程工具
** ntsysv --查看守护进程
** setup --配置网络
** chkconfig --list 查看启动项
** chkconfig --list| grep mysql --查看mysql的启动情况
** chkconfig mysqld on --将mysql设为开机启动
** chkconfig --levels 123 mysqld on --设置为在运行级别 123 自动启动
*安装rpm包 搭建lamp环境
** rpm -qa|grep mysql --查看mysql是否已安装 (软件包管理程序(Red Hat Package Manager))
** mount /dev/cdrom /mnt --挂载光盘到 /mnt
** ls http* --显示 http* 的文件
** rpm -ivh httpd-devel-2.2.3-45.el5.centos.i386.rpm --安装相应的 .rpm
** rpm -e mysql --uninstall mysql 用--nodeps强行卸载
** service httpd start --启动apache
** vi /var/www/html/test.php --写一个php文件 ,网页文件都放在 /var/www/html/中
这时候不能看见mysql的信息,需要添加rpm -ivh php-mysql-5.1.6-27.el5_5.3.i386.rpm
** service mysqld start --启动mysql
** mysql -u root -p --进入mysql命令行
** rpm -V mysql -- verify soft
** rpm -qi openssh-server-3.5p1-6 --show the infomation of software installed
** rpm -ivh --replacefiles --replacepkgs VMwareTools-6.0.2-59824.i386.rpm --强制重新安装
** rpm -Uvh VMwareTools-6.0.2-59824.i386.rpm --update software
** rpm -Va --check all rpm
**
*日志
** 配置文件 /etc/syslog.conf
** 日志存储目录 /var/log/
&& cat wtmp 存放的是远程登录的者的信息,是二进制文件, cat wtmp 显示的是乱码
strings wtmp 才能够正常的查看二进制文件信息
** lastlog |more --show the last time users logined
** last --show all the users who logined since the OS first running
** lastb --show the list of invalidate users who have tring logining
** w --show the users online
** logrotate --日志滚动
*安装proftpd
**安装tar包
* tar -xf proftpd-1.3.0.tar 解压
* ./configure --prefix=/usr/local/proftpd -- configures this package to adapt to many kinds of systems
** make && make install --compile and install
** ./sbin/proftpd & --run the proftpd in backgroud
*查看 xinet
** ls /etc/xinetd.d/ all server under xinet
*安装openVS
**wget http://download.openvz.org/openvz.repo --第一次在CentOS中添加openVZ repository
rpm --import http://download.openvz.org/RPM-GPG-Key-OpenVZ
cp openvz.repo /etc.recpo.d
**yum install ovzkernel --安装openvz内核
** cat /boot/grub/menu.lst --安装过后,启动文件会增加openVS的信息
**yum install vzctl vzquota --安装openvz工具和插件
** hwclock --查看硬件时钟
date 052217532011 --set time
** runlevel --查看当前运行级别
init[0123466] --change the runlevel
telinit [0123456Ss --the same to upper
** grep -v '^#' openvz.repo --show the content which is not start by '#'
** /etc/rc.d/init.d --该目录下包含各个运行级别的服务程序脚本
*GRUB
**vi /boot/grub/grub.conf --查看GRUB的配置文件
** grub-md5-crypt --encript the password
** password --md5 $1$EszU60$Mc2BwxeWUH/8q3iqbRknz0 appent to grub.conf
**系统引导流程
固件firmware(CMOS/BIOS)
↓
自举程序BootLoader(GRUB)
↓
载入内核Kernel
↓
启动进程init
↓
读取执行配置文件/etc/inittab
→
POST 加电自检
→
载入内核
→
驱动硬件
** echo "123456" |md5sum --show the result encripted by md5 (f447b20a7fcbf53a5d5be013ea0b15af )
//=================================================================================================
Ubuntu Ubuntu Ubuntu Ubuntu Ubuntu Ubuntu Ubuntu
//=================================================================================================
Ubuntu Ubuntu Ubuntu Ubuntu Ubuntu Ubuntu Ubuntu
//=================================================================================================
*alt+f2 --run a soft
alt+f1 --run 'start'
ctrl+alt+l --lock the screen
*安装ssh
** sudo apt-get install openssh-server --install OpenSSH Server
** ps -e | grep ssh --ensure ssh has start or not
** sudo /etc/init.d/ssh resart --restart ssh server
*JDK 安装
**vi /etc/profile
&&JAVA_HOME=/home/yangguowei/jdk
JRE_HOME=/home/yangguowei/jdk
PATH=$PATH:$JAVA_HOME/bin:JRE_HOME/bin:
CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar:$JRE_HOME/lib:
export JAVA_HOME JRE_HOME PATH CLASSPATH
**source /etc/profile (命令使环境变量生效)
*tomcat 的安装
** tar zxvf apach-tomcat-6.0.16.tar.gz
** #vi /etc/profile
export TOMCAT_HOME=/usr/local/apach-tomcat-6.0.16
** source /etc/profile //让当前配置立即生效
** $ /usr/local/apach-tomcat-6.0.16/bin/startup.sh ---启动tomcat服务器
** ps -ef | grep tomcat --show tomcat process ,Tomcat will show up as a "java" process
ps -ef |grep tomcat
*mysql 安装
**sudo apt-get install mysql-server mysql --install mysql
** sudo restart mysql #重启
sudo start mysql #启动
sudo stop mysql #停止
** sudo aptitude purge mysql-server mysql --uninstall mysql
** sudo apt-get install aptitude install command of aptitude
sudo aptitude install kchmviewer-nokde
sudo aptitude remove kchmviewer-nokde
** mysql -u root --go into mysql
** show variables like 'character%'; --show mysql's charset
**修改MySQL字符集
** sudo vi /etc/mysql/my.cnf
在[client]下添加 default-character-set=utf8
在[mysqld]下添加 default-character-set=utf8
*硬盘
** sudo fdisk -l --show disk subarea
df
** cat /proc/meminfo --show the info of memory
**增加swap分区
** sudo dd if=/dev/zero of=/mnt/256M.swap bs=1M count=256 --Creating a file for 512 MB size you want: ,不能有空格
** sudo mkswap /mnt/256M.swap --Formatting that file to create a swapping device:
** sudo swapon /mnt/256M.swap --Adding the swap to the running system:
** sudo vi /etc/fstab --Making the change permanent:
/mnt/256M.swap none swap sw 0 0 --Add this line at the end of the file:
** reboot
*install oracle
** sudo dpkg -i libaio1_0.3.107-3ubuntu2_i386.deb --install a utility tool
在处理时有错误发生: oracle-xe-universal原因是因为没有装libaio
** sudo dpkg -i oracle-xe-universal_10.2.0.1-1.0_i386.deb --package manager for Debian
** /etc/init.d/oracle-xe configure -- configure oracle
Specify the HTTP port that will be used for Oracle Application Express [8080]:8099
Specify a port that will be used for the database listener [1521]:1521
18.initial configuration: --initiate a password
Do you want Oracle Database 10g Express Edition to be started on boot (y/n) [y]:y
** username: sys password: 123456
** $LANG --show the language of system
//=================================================================================================
red hat linux red hat linux red hat linux red hat linux red hat linux
//=================================================================================================
red hat linux red hat linux red hat linux red hat linux red hat linux red hat linux
//=================================================================================================
*启动新的终端
** press Ctrl-Alt-Space ==> release Space without releasing Ctrl and Alt
==> press the function key for the workspace you want to use — for example, F2.
linux 共有6个终端
** Ctrl+Alt+F7 返回Xwindow
* opehssh 安装
** ./configure --prefix=/usr --sysconfdir=/etc/ssh --with-pam --with-zlib=/usr/local/zlib --with-ssl-dir=/usr/local/openssl --with-md5-passwords
make && make install
** service sshd start
** /etc/init.d/sshd status --show the status of ssh
** service iptables stop //关闭防火墙
/etc/init.d/iptables status
* 虚拟机tools 安装
** vmware-uninstall-tools.pl --uninstall vmware-tools
**
* 恢复 误删的文件
** init 1 --take system to a single user mode
** Using grep (traditional UNIX way) to recover files --恢复text文件
Use following grep syntax:
grep -b 'search-text' /dev/partition > file.txt
OR
grep -a -B[size before] -A[size after] 'text' /dev/[your_partition] > file.txt
Where,
-i : Ignore case distinctions in both the PATTERN and the input files i.e. match both uppercase and lowercase character.
-a : Process a binary file as if it were text
-B Print number lines/size of leading context before matching lines.
-A: Print number lines/size of trailing context after matching lines.
To recover text file starting with "nixCraft" word on /dev/sda1 you can try following command:
# grep -i -a -B10 -A100 'nixCraft' /dev/sda1 > file.txt
**
** ls -l /lib/modules/2.4.18-6mdk/kernel/fs --show the type of file system
**
**
**
*硬件管理
** vmstat --show the virtual memory statistics
*文件系统管理
** sort README -- sort the content of a text
** cat readme1 readme2 |sort >yang --merge readme1 and readme2 and sort the content write into new file yang
** uniq -d yang ---show the content which is repeat
** wc -w yang --statistics the quantity of words in yang
** comm -23 readme r2 --compare the comtent of two text
** diff r1 r2 -- compare the comtent of two text
**
**
* 查看linux版本
** cat /etc/issue ---show the version of redhat
cat /etc/redhat-release
cat /proc/version
* 系统的用户和组管理
** cat /etc/gshadow
cat /etc/group --store the message of group
cat /etc/shadow
cat /etc/passwd
** pwck /etc/passwd --check whether /etc/passwd is ok refer to /etc/shadow
grpck /etc/group
** redhat-config-users --启动用户管理UI
* 进程管理
** at --execute a process at a special time
** batch --execute a process whe the device is low load
** cron --execute a process periodical
vi job --make a file refer the command to do
10 07 31 05 2 ls /etc/passwd
crontab job --add the file contain command to the crontab
/var/spool/cron/root --store the user's tasks
** sleep 5; ls --sleep a process
** fg ./ls --recove a process from jobs
bg ./ls
*计划任务
** 计划任务的命令
at 安排作业在某一时刻执行一次
batch 安排作业在系统负载不重时执行一次,使用方法同at
cron 安排周期性运行的作业,用于生成cron进程所需要的crontab文件
** at [-f 文件名] 时间
at -d or atrm 删除队列中的任务
at -l or atq 查看队列中的任务
** at命令指定时间的方式
绝对计时方法
midnight noon teatime
hh:mm [today]
hh:mm tomorrow
hh:mm 星期
hh:mm MM/DD/YY
相对计时方法
now + n minutes
now + n hours
now + n days
** 指定在今天下午17:30 执行某命令(假设现在时间是下午14:30,2011年1月11日)。
at 5:30pm
at 17:30
at 17:30 today
at now + 3 hours
at now + 180 minutes
at 17:30 11.1.11
at 17:30 1/11/11
** 使用命令文件方式
1. 生成文件at.script:
2. 使用at命令
at -f at.script 9:00 2/2/11 or
at < at.script 9:00 2/2/11
** at配置文件
/etc/at.allow
/etc/at.deny
** crontab的命令格式
crontab {-l|-r|-e}
-l 显示当前的crontab
-r 删除当前的crontab
-e 使用编辑器编辑当前的crontab文件。
** crontab文件格式
minute hour day-of-month month-of-year day-of-week commands
minute 一小时中的哪一分钟[0~59]
hour 一天中的哪个小时[0~23]
day-of-month 一月中的哪一天[1~31]
month-of-year 一年中的哪一月[1~12]
day-of-week 一周中的哪一天[0~6]
commands 执行的命令
**
**
**
**
**
**
**
**
**
**
**
**
*网络管理
** /etc/xinetd.d/ --store the infomation of net ,保存服务的配置
** ntsysv --查看守护进程
** setup --配置网络
** rpm -qa |grep squid --check whether has insatlled the DHCP
rpm -qa |grep dhcp
*DNS
** rpm -qa |grep bind --check whether has insatlled the DNS
** service named statt --start the service of DNS
** rndc named --show the status of DNS service
*远程登录
** rpm -qa |grep telnet --check whether has insatlled the telnet
** vi /etc/services ---config telent ,set the port of telnet
** telnet 127.0.0.1 --telnet a host
*邮件服务器 Sendmail Server, POP,IMAP
** 邮件传递代理 (MTA)
邮件存储和获取代理 (MSA)
邮件客户代理 (MUA)
** rpm -qa |grep sendmail --
** rpm -qa |grep imap
**
* mysql 数据库
** mysqladmin -u root password 123456 --set a password for mysql
** mysqladmin -u root -p password [newpasswd] --modify the password
//=================================================================================================
RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL
//=================================================================================================
RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL RHEL
//=================================================================================================
* 网络管理和诊断
** sysctl --configure kernel parameters at runtime
** cat /etc/resolv.conf --查看域名服务器ip
** dig baidu.com --查看域名对应的ip
** cat /etc/hosts --查看host表
** dmesg|grep eth --查看操作系统引导网卡的信息
** lspci --查看所有的PCI设备
---这两条命令查看网卡的硬件信息
** ethtool eth0 --查看链路链接是否正常
** ls /lib/modules/2.6.18-8.el5/kernel/drivers/net/ --网卡驱动存放位置
** lsmod |grep pcnet32 --查看当前系统装载的模块是否有 pcnet32
lsmod --program to show the status of modules in the Linux Kernel
** modinfo /lib/modules/2.6.18-8.el5/kernel/drivers/net/pcnet32.ko --查看 pcnet32.ko 模块信息
** netstat -anp |grep :80 --查看某一端口信息
** tcpdump host 192.168.160.138 and tcp port 80 --抓取通过tcp协议与本机192.168.160.138的80端口通信的数据包
** nmap 192.168.160.1 --扫描目标主机的端口
-O :查看目标主机的操作系统
* 日志系统
** rpm -qa sysklogd --查看日志记录软件包是否安装
** ps -eaf |grep syslog --查看日志进程是否运行
ps -eaf |grep klog
** cat /etc/syslog.conf --日志配置文件
** rpm -qa logrotate --查看日志转储软件呢包是否安装
** more /etc/logrotate.conf --配置
** rpm -qa psacct --记账功能
* 路由配置
** route add -net 127.0.0.0 netmask 255.0.0.0 dev lo --add a static route
** rpm -qa iproute --路由表管理软件
*防火墙
** iptables -L --查看默认的防火墙规则
**
**
*firefox 安装 flash 插件
** 先解压tar。gz文件
** sudo cp libflashplayer.so /usr/lib/firefox-addons/
sudo ln /usr/lib/firefox-addons/libflashplayer.so /usr/lib/mozilla/plugins/libflashplayer.so
**
**
**
**
**
**
分享到:
相关推荐
linux命令行大全(分模块、很清晰全面)
《linux命令行大全》主要介绍linux命令行的使用,循序渐进,深入浅出,引导读者全面掌握命令行的使用方法。 《linux命令行大全》分为四部分。第一部分开始了对命令行基本语言的学习之旅,包括命令结构、文件系统的...
Linux命令行大全
Ubuntu.Linux命令行大全.pdf
linux命令行大全.pdf
《Linux命令行大全》.William E.shotts,Jr.part4.rar
linux命令行大全
linux命令行大全
Linux命令行大全中文版(CHM格式).rar 学好linux不可缺少的好助手 详细的中文解释、example
《Linux命令行大全》主要介绍Linux命令行的使用,循序渐进,深入浅出,引导读者全面掌握命令行的使用方法,涵盖全部的Linux核心命令,解读深奥的Linux详细参数,设计串联的Linux命令组合,跟踪可疑的Linux执行过程,...
Linux命令行大全中文版(CHM格式).rar 很小,很经典
linux命令行 为什么使用命令行? 你是否注意到,在电影中一个“超级黑客”坐在电脑前,从不摸一下鼠标, 就能够在30秒内侵入到超安全的军事 计算机中。这是因为电影制片人意识到, 作为人类,本能地知道让计算机圆满...
Linux命令行大全,The Linux Command Line,【美】William E. Shotts, Jr. 著, 郭光伟 郝记生 译 本资源为中文译本,影印版,175.1M,带有简单目录(是我自己添加的)
Linux命令行大全总结